İşleminiz Devam Ediyor.
Lütfen Bekleyiniz...
Lütfen Bekleyiniz...
CNC Torna (FANUC) Programlama
| WEEK/ HOURS | SUBJECT | SYLLABUS | DESCRIPTIONS | |
|---|---|---|---|---|
| 4 | 1. CNC PROGRAMMING STRUCTURAL FEATURES | • Program Writing Tools (Bench Panel, Notepad, Text Document, etc.) • Terminology and CNC Program Structure • Explanation of Introduction (O, %, $, ( ), //, # etc.) • Line Structure in CNC Lathe • Line Number (N01, N10, etc.) • Addresses (G and M codes) • End of line (;) • Technological Information (F, S, T, G, M, etc.) • Geometric Information (G0, G1, G2, X, Z, Y, C, U, W., etc.) |
||
| 4 | 2. INTRODUCTION TO PROGRAMMING ON CNC LATHE | • Naming the Program and Entering the Controller • CNC Lathe Coordinate Systems • Machine and Part Coordinate System • To specify the dimensions in mm in the program • To specify dimensions in inches in the program • Absolute Programming • Incremental Programming • Getting Started and Commands • Insert Radius Compensation • Number of Revolutions and Feed Rate (Finding S and F Values) • Cutting Speed, Number of Revolutions, Advance Calculation • Program Introductory Section and Commands • End of Program Section and Commands • Return to Machine Reference Point • Program Transition Commands and Points of the Machine in Mass Production |
||
| 4 | ||||
| 4 | 3. CNC LATHE PROGRAMMING | • Choosing the Cutter's First Approach Method to the Workpiece • Face Turning • Cylindrical Turning • Conical Turning |
||
| 4 | 4. CNC LATHE CURVES PROGRAMMING | • Curve Programming • Clockwise • Counter Clockwise |
||
| 4 | 5. CUTTING PARTS AND GROOVING ON CNC LATHE | • Part Cutting • Part Cutting Cycle • Outer Diameter Grooving • Outer Diameter Grooving Cycle |
||
| 4 | 6. HOLE DRILLING ON CNC LATHE | • Drilling • Drilling boring machine • Taping |
||
| 2 | ||||
| 4 | 7. UNLOADING CYCLES IN CNC LATHE | • Face Turning • Face Turning Cycle • Roughing Cycle on Face • Cylindrical Turning • Cylindrical Turning Cycle • Cylindrical Roughing Cycle • Finish Turning Cycle • Profile Repeat Cycle • Part Cutting Cycle • Grooving Cycle • Wedge Groove Opening • Corner Rounding • Screw plating |
||
| 4 | ||||
| 2 | 8. CNC LATHE HOLE CYCLES | • Hole Drilling (pecking) Cycle • Drilling (Chip Release) Cycle • Tapping Cycle • Reverse Tapping Cycle • Reamer Drawing Cycle |
||
| 6 | ||||
| 4 | 9. SCREWING CYCLES IN CNC LATHE | • Right Side Screw Opening Cycle • Left Side Screw Opening Cycle • Single-Head Screw Opening • Multi-Head Screw Opening |
||
| 4 | 10. SUB PROGRAMMING | • Purpose of Subprogram • Sub programming |
||
| 4 | 11. MEASUREMENT AND EVALUATION | • Writing the Program of a Given Piece • Testing the Written Program by Transferring it to the CNC Machine • Checking the Workpiece |
||
(This Program has been prepared by KCCVTC and includes a 2-month training to organize an 8-hour course every week. It is a prerequisite of the course to train and work on a CNC Lathe and be able to use a CNC Lathe. It aims to work efficiently in the manufacturing sector by programming on a CNC Lathe at intermediate and advanced levels.)
